Freshen the stance of your Tesla Model 3 Highland with our Wide Stance Billet Spacers. The factory wheel fitment on Model 3 Highland rear wheels is notably inboard (sunken deep into the wheel wheel), creating a void between the outer edge of the rear wheels and tires, and the rear fender.  Our Wide Stance Billet Spacers will give your Tesla Model 3 Highland a more sporty stance and a more flush look in the rear, closing the gap between the tires and fender.  These spacers are designed specifically for Tesla Model Highland fitment, ensuring proper fitment. The spacers are machined out of 6061-T6 billet aluminum and use grade 10.9 metric studs meet ASTM A324 grade BD and SAE J429, grade 8 standards. The DIY-friendly spacers simply bolt-on to your Tesla Mode 3 Highland and are compatible with all model variations including the Performance model.   Reference the fitment chart below to see how the spacers combine with each T Sportline Model 3 Highland Flow Forged or Fully Forged wheel, giving you an engineered solution. 

Installing these spacers will offset the rear wheels outward by 5mm, 20mm / 0.8 inch, or 25mm / 1 inch, bringing the wheel and tire closer to flush with the fender.  The spacers are 100% compatible with Tesla Model 3 Highland standard range, long range and performance variants.  

T Sportline spacers are engineered specifically for Tesla fitment.  These are not 'generic fitment' spacers made to fit various vehicles.  Notice the attention to detail on the backside of T Sportline spacers - designed specifically to match Tesla wheels and retain the proper water escape channeling exactly matching OEM factory hub design.  Inferior spacers have flat designs which prevent water from escaping and leads to corrosion and potential hub failure.  

T Sportline spacers are compatible with:

• 2024-present Tesla Model 3 Highland: all variants including Performance Model
• 5 mm , 20 mm, 25 mm
  
• Tesla Factory Lug Nuts
• Tesla Factory Wheels
• T Sportline Lock Nuts
• T Sportline Titanium Lug Nuts 
• T Sportline Wheels 

Spacer Kit Includes

• 2x Billet Aluminum Tesla-Spec Spacers 

Specifications

• PCD: 5x114.3 (Tesla Model 3)
• Lug Nut Torque Spec: 129lb-ft
  
• Engineered with proper factory Tesla-spec hub and lug fitment
• Approved Fitment Applications
• Model 3 Rear Wheels 18" x 8.5"
• Model 3 Rear Wheels 19" x 8.5"
• Model 3 Rear Wheels19" x 9.5"
• Model 3 Rear Wheels20" x 8.5"
• Model 3 Rear Wheels20" x 10"
  
• Works with factory Tesla lug nuts
• Finished in hard anodized black finish (5mm, 20mm, 25mm)
• Includes all required hardware

Net Offset with +5mm Spacers Installed

• 18" x 8.5": Net offset with spacer added +30 mm
• 19" x 8.5": Net offset with spacer added +30 mm
• 19" x 9.5": Net offset with spacer added +30 mm
• 20" x 8.5": Net offset with spacer added +30 mm
• 20" x 10": Net offset with spacer added +35 mm

Net Offset with +20mm / 0.8 inch Spacers Installed

• 18" x 8.5": Net offset with spacer added +15 mm
• 19" x 8.5": Net offset with spacer added +15 mm
• 19" x 9.5": Net offset with spacer added +15 mm
• 20" x 8.5": Net offset with spacer added +15 mm
• 20" x 10": Net offset with spacer added +20 mm

Net Offset with +25mm / 1 inch Spacers Installed

• 18" x 8.5": Net offset with spacer added +10 mm
• 19" x 8.5": Net offset with spacer added +10 mm
• 19" x 9.5": Net offset with spacer added +10 mm
• 20" x 8.5": Net offset with spacer added +10 mm
• 20" x 10": Net offset with spacer added +15 mm

Shipping is calculated at Checkout.

Shipping & Handling charges subject to change without prior notification. PLEASE NOTE THAT INTERNATIONAL SHIPMENTS ARE SUBJECT TO CUSTOMS TAXES/DUTIES, AS CHARGED BY YOUR COUNTRY (THERE ARE NO U.S. CUSTOMS FEES). INTERNATIONAL CUSTOMERS ARE RESPONSIBLE FOR PAYMENT OF THESE FEES. Due to service availability, some international orders may need to be sent to the nearest international airport.