Pirelli Scorpion XTM AT

Rugged all-terrain performance with the Pirelli Scorpion XTM AT. Aggressive tread design excels in off-road conditions while providing stable on-road manners for trucks and SUVs.

Built for adventure and capability.

EV Optimized & Load Rated for Electric Vehicles: High load capacity and tough construction suitable for electric trucks and adventure SUVs.

Off-road focused Scorpion.

Tire Specifications:

• Fits: T Sportline Tesla Cybertruck 22" Wheels
• Size: 285/55R22
• Weight: 54 LBS
• Speed Rating: S
• Load Rating: 124/121
  
• Load Range: N/A
• Load Capacity: 3525/3195
• Ply Rating: 10
• UTQG: N/A
  
• Color Sidewall: BSW
  
• Tread Depth: 14/32 
• Manufacturer Defect Warranty: 55,000
  
• Three-Peak Mountain Snowflake (3PMSF) Certified Rating: Yes
• Noise Canceling Technology: No

View Tire Manufacturer Rebates Here:

View Tire Shipping, Return & Refund Policy Here

When your Tesla has been stationary and out of direct sunlight for over three hours:

• Remove the tire air valve stem cap (unscrew cap by hand).
• Firmly press a tire pressure gauge onto the valve stem tip to measure pressure (a small amount of air will escape during measurement, which is normal).
• Compare reading to Tesla Tire Pressure specification (found on the Tire and Loading Information label located midway up on the center door pillar, visible only when the driver’s door is open), add or remove air to match the recommended pressure. Reduce pressure by by pressing the metal pin in the center of the valve. Increase pressure using an appropriate tire inflator pump or compressed air source.
• Re-check pressure using the tire pressure gauge.
• Re-install the valve stem cap (hand tighten)
• Important note: Under-inflation is the most common cause of tire failures and can cause a tire to overheat, resulting in severe tire cracking, tread separation, or blowout, which causes unexpected loss of car control and increased risk of injury. Under-inflation also reduces the car's range and tire tread life.
• Tesla TPMS sensors require driving for a short period of time before updated pressure readings are recorded accurately. Expect TPMS readings to reflect accurate tire pressure readings after driving 5 miles.

Factors impacting tire pressure readings:

• Ambient temperature - Air pressure increases in heat and decreases in cold.
• Tire temperature – Tires warm up during use.
• Sunlight – directly sunlight will increase tire temperature and thereby tire pressure.