Backordered ETA:

• +15mm / 0.6 inch - Backordered - Estimated Ship Date Mid July

The factory wheel fitment on Model S / X rear wheels is notably inboard (sunken deep into the wheel wheel), creating a void between the outer edge of the rear wheels and tires, and the rear fender.  Give your 2012-2026 Model S / 2016-2026 Model X a more sporty stance and more flush look in the rear, closing the gap between the tires and fender, with T Sportline billet aluminum rear wheel spacers.   These spacers are designed specifically for Tesla Model S / X fitment, ensuring proper fitment.  Installing these spacers will offset the rear wheels outward by 5mm / 0.2 inch or 20mm / 0.8 inch, bringing the wheel and tire closer to flush with the fender.  

T Sportline spacers are engineered specifically for Tesla fitment.  These are not 'generic fitment' spacers made to fit various vehicles.  Notice the attention to detail on the backside of T Sportline spacers - designed specifically to match Tesla wheels and retain the proper water escape channeling exactly matching OEM factory hub design.  Inferior spacers have flat designs which prevent water from escaping and leads to corrosion and potential hub failure.  

Important Fitment Information - PLEASE read and plan accordingly!

Generally speaking, spacers must be confirmed compatible with both the wheels and the lug studs before proceeding.   Please read and confirm compatibility accordingly:

5mm spacers: Factory lug studs are typically 'long enough' to work with 5mm spacers.  Check to see if your lug studs have 5mm of additional threads (aka - exposed threads extending beyond the lug nut when the wheel is installed without a spacer).  If not (or if in doubt), replace your lug studs with our stock replacement lug studs (optional add-on).

15mm spacers: Factory lug studs protrude though the face of the 15mm spacer and you'll need to confirm your wheels have sufficient 'pocket clearance' on their backside to clear these protruding lug studs.  If the studs protrude more than the depth of the wheel backside pocket (most T Sportline wheels have sufficient pocket depth, but many factory wheels will not and require stud replacement), you can replace your lug studs with our 'short' replacement lug studs.  If your wheel pockets bottom out on the protruding factory studs, you'll break the spacer studs over time.  

20mm spacers: Factory lug studs should be fine, but in case of concern you can switch to our stock replacement lug studs (optional add-on).

Spacer Kit Includes

• 2x Billet Aluminum Tesla-Spec Spacers, choice of:
• 5mm / 0.2 inch
• 15mm / 0.6 inch
• 20mm / 0.8 inch 
• NOTE: 15mm and 20mm includes integrated Lug Studs and Spacer Retaining Nuts

Specifications

• PCD: 5x120 (Tesla Model S and Model X only)
• Lug Nut Torque Spec: 129lb-ft
  
• CNC Machined From 6061-T6 Aluminum 
• Finish:
  • 5mm Edge is finished 'black' to make the spacers less visible
  • 15mm and 20mm is fully anodized black
• Preserves proper factory Tesla-spec hub and lug fitment
• Size: +5 mm / 0.2 inch or +15mm / 0.6 inch or +20 mm / 0.8 inch
  
• 15mm and 20mm uses grade 10.9 metric studs meet ASTM A324 grade BD and SAE J429, grade 8 standards. 

Shipping is calculated at Checkout.

Shipping & Handling charges subject to change without prior notification. PLEASE NOTE THAT INTERNATIONAL SHIPMENTS ARE SUBJECT TO CUSTOMS TAXES/DUTIES, AS CHARGED BY YOUR COUNTRY (THERE ARE NO U.S. CUSTOMS FEES). INTERNATIONAL CUSTOMERS ARE RESPONSIBLE FOR PAYMENT OF THESE FEES. Due to service availability, some international orders may need to be sent to the nearest international airport.