{"product_id":"tesla-model-s-x-2-2021-2026-adjustable-suspension-lowering-links-rsx-4-tartan-n2itive","title":"Tesla Model S \/ X (2\/2021-2026) Adjustable Suspension Lowering Links, RSX-4 TARTAN N2ITIVE","description":"\u003ch1 style=\"text-align: center;\"\u003eN2itive RSX-4 Adjustable Lowering Links for Tesla Model S \u0026amp; Model X\u003cbr\u003e\u003cbr\u003e\n\u003c\/h1\u003e\n\u003cp\u003eN2itive RSX-4 Ride Height Adjustment Links are among the most precise and advanced lowering links available for the Tesla Model S and Model X. Designed specifically for vehicles equipped with factory air suspension, the RSX-4 system allows you to achieve your ideal ride height while fully retaining Tesla's active suspension damping and factory ride height adjustment through the touchscreen.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eUnlike conventional lowering links, the RSX-4 features an integrated Vernier adjustment scale, allowing for incredibly precise adjustments in increments as small as 0.1 mm. The built-in scale makes it easy to verify that each link is adjusted to the exact same length, eliminating the need for calipers or estimating adjustments by feel. Whether you're looking for a subtle reduction in wheel gap or an aggressively lowered stance, the RSX-4 delivers unmatched precision and repeatability.\u003c\/p\u003e\n\u003ch2\u003e\u003cbr\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for Tesla Model S and Model X with factory air suspension\u003c\/li\u003e\n\u003cli\u003eRetains full factory active suspension damping and ride height adjustment\u003c\/li\u003e\n\u003cli\u003eIntegrated Vernier scale for precise, repeatable adjustments\u003c\/li\u003e\n\u003cli\u003eFine adjustment capability down to 0.1 mm\u003c\/li\u003e\n\u003cli\u003eAchieve anything from a mild drop to an aggressively lowered stance\u003c\/li\u003e\n\u003cli\u003eIncludes a complete set of four adjustable lowering links\u003c\/li\u003e\n\u003cli\u003eTypical installation time of approximately 30 minutes using basic hand tools\u003c\/li\u003e\n\u003cli\u003eAvailable Finishes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComplete Your Suspension Upgrade\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor the best performance and tire life, N2itive recommends pairing the RSX-4 Lowering Links with N2itive SX-P2 Adjustable Rear Control Arms. Lowering a Tesla increases negative rear camber, which can lead to accelerated inner tire wear and, in severe cases, premature tire failure. The SX-P2 control arms restore proper alignment while allowing you to maintain your desired ride height, reducing excessive camber, minimizing inner tire wear, and helping eliminate acceleration shudder.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e After installing lowering links, proper wheel alignment is strongly recommended. Be sure to periodically inspect the inside shoulder of your rear tires, as excessive inner tire wear is often difficult to see during routine inspections.\u003c\/p\u003e\n\u003ch3\u003e\n\u003cspan\u003e\u003c\/span\u003e \u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFeb 2021 - 2026 Tesla Model S (all versions, Long Range and Plaid)\u003c\/li\u003e\n\u003cli\u003eFeb 2021 - 2026 Tesla Model X \u003cmeta charset=\"utf-8\"\u003e(all versions, Long Range and Plaid)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOptions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAnodized Red \u0026amp; Clear Natural (3-Year Warranty)\u003c\/li\u003e\n\u003cli\u003eAnodized Black \u0026amp; Nickel Plated (Lifetime Warranty)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e4 TARTAN RSX-4 Lowering Links\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAllen Key\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv class=\"product-collapse\"\u003e\n\u003cdetails\u003e\n\u003csummary\u003eClick for Installation Instructions\u003c\/summary\u003e\n\u003cdiv class=\"product-collapse-content\"\u003e\n\u003cp\u003e\u003cstrong\u003eEstimated Labor:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e0.5-1 hour(s)\u003cbr\u003e\u003cstrong\u003eRecommended Settings:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e-4 mm on each lowering link\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eParts and Tools Necessary:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e21mm wrench and socket\u003c\/li\u003e\n\u003cli\u003e1.5mm allen key (included)\u003c\/li\u003e\n\u003cli\u003eFlat head screwdriver or other prying tool\u003c\/li\u003e\n\u003cli\u003eChannellocks (preferably taped to prevent damage)\u003c\/li\u003e\n\u003cli\u003eTorque Wrench\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-collapse-content\"\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cstrong\u003eBEFORE INSTALL:\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-collapse-content\"\u003e\n\u003cul\u003e\n\u003cli\u003eIf the vehicle is equipped with air suspension, activate “Jack Mode” through the touchscreen before lifting the vehicle. The air suspension will attempt to self-level otherwise, which may cause serious damage, bodily injury, or death.\u003c\/li\u003e\n\u003cli\u003eMake yourself familiar with the proper way to jack and lift your Tesla before attempting installation.\u003c\/li\u003e\n\u003cli\u003eFor vehicles pre-2021: the shorter 50mm links are to be installed in the front of the car, and the 70mm links in the rear. Keep note of how the links currently sit on the car, as this will be important for reassembly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-collapse-content\"\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cstrong\u003eREAR REMOVAL\/INSTALLATION:\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-collapse-content\"\u003e\n\u003cbr\u003e1. Jack the vehicle up from the appropriate lift areas, as shown below. Using lift pads between the jack and the vehicle’s frame is highly recommended in order to avoid damaging the vehicle.\u003cbr\u003e2. Loosen the lug nuts (21mm) and remove the rear wheel.\u003cbr\u003e* Before removal of the lowering links, take pictures of the links as reference for reassembly. Improper positioning of the links will lead to error codes when you finish the install.\u003cbr\u003e3. Pry off the sensor link from the ball attached to the camber arm. This can be done with a large flat head screwdriver or small pry bar, gently using the original camber arm as a fulcrum point. Always exercise caution when dealing with the links, as they have many points of failure.\u003cbr\u003e4. Once one side is free, you may peel the link back until it pops off of the green arm attached to the ride height sensor. Again, use caution as the plastic can be brittle on the sensor side.\u003cbr\u003e5. Using either your fingers or a channellock, press the N2itive lowering links back onto the studs. If using channellocks, it is advised to put a layer of cloth or tape between the link and the channellock to avoid damage on the finish.\u003cbr\u003e6. Remount the wheels back on the vehicle and torque down the lug nuts to 129 ft\/lbs (175 Nm). Make sure to remove all jack stands and tools from under the vehicle before you let it down.\u003c\/div\u003e\n\u003cdiv class=\"product-collapse-content\"\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cstrong\u003eFRONT REMOVAL\/INSTALLATION:\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-collapse-content\"\u003e\n\u003cbr\u003e1. Raise the air suspension to the “Very High” setting and activate “Jack Mode” through the vehicle’s screen. Some refreshed models may find the process easier with the wheel off.\u003cbr\u003e2. Pry off the short sensor link from the ball attached to the camber arm. This can be done with a large flat head screwdriver or small pry bar, gently using the original camber arm as a fulcrum point. Use extreme caution in the front, as the arm and stud attachment are made of plastic.\u003cbr\u003e3. Once one side is free, you may peel the link back until it pops off of the green arm attached to the ride height sensor. Again, use caution as the plastic can be brittle on the sensor side.\u003cbr\u003e4. Some older models may require the fender liner to be trimmed. Test the range of motion that the green arm has, and if it seems to get stuck in the liner, trim accordingly to fit the longer links on the car. Please use caution to not cut the wiring behind the liner.\u003cbr\u003e4. Using either your fingers or a channellock, press the N2itive lowering links back onto the studs. If using channellocks, it is advised to put a layer of cloth or tape between the link and the channellock to avoid damage on the finish.\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cstrong\u003eADJUSTMENT:\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-collapse-content\"\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustment of the RSX-4 is to be made using the 1.5mm allen key as provided alongside the links.\u003c\/li\u003e\n\u003cli\u003eLoosen the allen screw one rotation to allow the neck to move freely. Tighten or rotate the link clockwise to lengthen the link, thus lowering the car. Loosening or rotating the link counter-clockwise will shorten the link and raise the car.\u003c\/li\u003e\n\u003cli\u003eOnce you are done adjusting, tighten the set screw until it is snug. Do not overtorque the set screw, as it may strip or damage the neck.\u003c\/li\u003e\n\u003cli\u003eAdjustments can be made while the links are on or off the vehicle. We recommend you figure your preferred ride height before getting an alignment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003c\/div\u003e\n\u003cstyle\u003e\n  .product-collapse {\n    border-top: 1px solid #ddd;\n    border-bottom: 1px solid #ddd;\n    margin: 20px 0;\n  }\n\n  .product-collapse summary {\n    cursor: pointer;\n    font-weight: 600;\n    padding: 16px 0;\n    list-style: none;\n  }\n\n  .product-collapse summary::after {\n    content: \"+\";\n    float: right;\n  }\n\n  .product-collapse details[open] summary::after {\n    content: \"−\";\n  }\n\n  .product-collapse-content {\n    padding: 0 0 16px;\n    line-height: 1.6;\n  }\n\u003c\/style\u003e","brand":"N2ITIVE","offers":[{"title":"Red \u0026 Clear Natural (Matte Clear) Anodized","offer_id":53019852964129,"sku":null,"price":398.0,"currency_code":"USD","in_stock":true},{"title":"Black Anodized \u0026 Black Electroless Nickel Plated (Lifetime Warranty)","offer_id":53019853029665,"sku":null,"price":480.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1724\/5219\/files\/N2ITIVELinksTeslaModelS1.png?v=1783860749","url":"https:\/\/tsportline.com\/products\/tesla-model-s-x-2-2021-2026-adjustable-suspension-lowering-links-rsx-4-tartan-n2itive","provider":"T Sportline - Tesla Model S, 3, X \u0026 Y Accessories","version":"1.0","type":"link"}